|
|
|
|
|
Shears & Corner Rounder
|
|
Our handy shears and corner round are the
perfect accessory for cutting and trimming sublimation metal. A choice
of four shears to suit your requirement and budget
and a corner rounder to give your items that finished look.
With sublimation metal, you can print photos and
images for memorable gift items or you can you print metal signs, front
panels and a whole lot more. To print these types of products, all
you require is our
'Bronze Package' to get started. You can
then use the accessories below to cut and professionally finish off your
project. |
 |
|
Corner
Rounder
The material to be rounded is slid from the left or right hand side
positively into the stops, to leave an overhang which is sheared through
by the punch to leave a clean corner of either 6mm or 4mm radius.
It should be noted that
material originally cut out of square will result in an unbalanced round
being removed. The table support column is mounted on a 5" X 5" steel
plate with screw holes for bench fixing, although this will probably be
unnecessary for most users. Overall height with handle upright 8"
(205mm) and weight 1.2Kg.
|
Corner
Rounder
£150.00+VAT
|
Metal
Cutters
Two powerful, cost effective, shears which have the ability to
accurately cut PCB laminates, plastics, polymer plates up to 2.00mm
thick and aluminium up to 1.5mm.
An important feature of
these shears is safety. Free access to the cutting area is prevented by
heavy Perspex shielding extending along both sides of the blade. A
safety latch is fitted to the pivot to prevent operation without it
first being released. For positional accuracy the cutting bed is fitted
with a rule which is recessed to assist in securing the PCB or sheeting
whilst cutting is in progress.
The 8" Cutter is extremely compact with an overall height of only
575mm and a footprint of 335 X 140mm. It has a cutting bed of 110mm wide
from the blade although wider material can be cut.
The larger 12" Cutter will cut materials up to has a height of
670mm and a footprint of 440 x 245mm. It has a larger cutting bed 225mm
wide from the blade although once again wider material can be cut. |
8" Cutter costs
£175.00+VAT
12" Cutter costs
£225.00+VAT |
18" and
25" Shears
Two bench top shears
suitable for cutting printed circuit board laminates, thin metal sheet
and aluminium (1.5/2.0mm) or plastic labels / front panel materials. On
lowering the operating handle, a spring loaded clamp is activated which
holds the material securely during cutting, thus enabling cuts to be
made with a minimum of effort.
|
18"
Shears cost
£450.00+VAT
|
These shears are composed of
an epoxy powder coated cast aluminium frame fitted with hardened and
ground steel blades. The 18" Model has a clear acrylic front safety
guard to protect the operator, whilst at the same time making it
possible to see the blades so that the material to be cut can be aligned
accurately.
Both , the 18" Cutter and the 25" Cutter have imperial and metric edge
scales and fully adjustable front and back stops for batch work.
|
24" Shears costs
£925.00+VAT |
|
|
|
|
|
Contact us
-
Terms & Conditions |
